The Spectral Snuggle Wraith Free Pattern – A Knitted Ode to Gentle Haunts

Meet the Spectral Snuggle Wraith—a delightfully spooky yet irresistibly cuddly knitted ghost that's perfect for Halloween décor or a year-round companion for cozy nights. This ethereal little specter is worked in soft, fluffy white yarn with an oversized hood and a gentle, friendly face that will charm everyone who sees it. Whether you're a seasoned knitter or just starting your amigurumi journey, this beginner-friendly pattern will guide you through creating a plump, squishy ghost that's as fun to make as it is to snuggle.

With simple stockinette stitches, minimal shaping, and easy seaming, this project comes together quickly and makes a wonderful handmade gift. The oversized hood gives the Wraith its signature silhouette, while the tiny embroidered eyes and rosy cheeks add a touch of sweetness to its spectral charm. Let's get started on bringing this gentle haunt to life!

Materials Needed

Before you begin, gather the following supplies. This pattern is written for knitting, but you can easily adapt it to crochet if you prefer—just be sure to adjust your gauge accordingly.

Yarn

• Main color: Worsted weight (Category 4) yarn in white—approximately 150–200 yards. Choose a soft, fluffy yarn for that cozy, cloud-like texture.
• Face color: Small amount of black worsted weight yarn for embroidering the eyes.
• Cheek color: Small amount of pink worsted weight yarn for the rosy cheeks.

Needles & Notions

• Knitting needles: US 5 (3.75 mm) straight needles for the body and arms, plus a set of double-pointed needles (DPNs) or a circular needle for the hood (worked in the round).
• Tapestry needle: For seaming pieces together and weaving in ends.
• Stitch markers: One marker for the beginning of the round on the hood.
• Scissors: For cutting yarn.

Gauge

20 stitches and 28 rows = 4 inches in stockinette stitch. Gauge is not critical for this project, but keeping even tension will ensure a neat, professional finish.

Step-by-Step Instructions

This pattern is knitted flat in pieces and seamed together. The body is worked from the bottom up, then the hood is picked up and knit in the round. All pieces are sewn together with a tapestry needle. Take your time, follow each step carefully, and you'll have a charming ghost in no time.

Body (Make 2 Pieces: Front and Back)

Cast on: With white yarn, cast on 24 stitches.

Row 1 (RS): Knit all stitches.

Row 2 (WS): Purl all stitches.

Repeat Rows 1–2 until the piece measures 4 inches from the cast-on edge, ending with a wrong-side row. This forms the straight bottom section of the body.

Shape Bottom Flare

Now we'll create the gentle flare at the bottom of the ghost's body.

Next row (RS): K2, k2tog (knit 2 together), knit to the last 4 stitches, k2tog, k2. (22 stitches)

Next row (WS): Purl all stitches.

Repeat these 2 rows 3 more times. You should now have 16 stitches on your needle.

Work Even

Continue in stockinette stitch (knit on RS, purl on WS) until the piece measures 6 inches from the cast-on edge, ending with a wrong-side row.

Shape Shoulders

Now we'll narrow the top of the body to form the shoulders.

Next row (RS): K1, k2tog, knit to the last 3 stitches, k2tog, k1. (14 stitches)

Next row (WS): Purl all stitches.

Repeat these 2 rows once more. You should now have 12 stitches on your needle.

Bind off: Bind off all stitches loosely. Leave a long tail (about 12 inches) for seaming. Repeat this entire section to make the second body piece.

Hood (Knitted in the Round)

The hood is worked directly from the neck edge of the body, creating a seamless transition.

Pick up stitches: With white yarn and your circular needle or DPNs, pick up and knit 24 stitches evenly around the neck edge of the body—12 stitches from the front piece and 12 stitches from the back piece. Place a stitch marker to mark the beginning of the round.

Round 1: Knit all stitches.

Round 2: *K1, M1 (make one—pick up the bar between stitches and knit through the back loop), repeat from * to end. (48 stitches)

Work even in stockinette (knit every round) until the hood measures 3 inches from the pick-up round.

Shape Top of Hood

Now we'll decrease to close the top of the hood.

Round 1: *K2, k2tog, repeat from * to end. (36 stitches)

Round 2: Knit all stitches.

Round 3: *K1, k2tog, repeat from * to end. (24 stitches)

Round 4: Knit all stitches.

Round 5: *K2tog, repeat from * to end. (12 stitches)

Cut the yarn, leaving a long tail. Thread the tail through a tapestry needle, slide the needle through the remaining 12 stitches, and pull tight to gather. Secure the yarn with a knot and weave in the end.

Arms (Make 2)

Cast on: With white yarn, cast on 10 stitches.

Work in stockinette stitch (knit RS, purl WS) for 2 inches, ending with a wrong-side row.

Shape Hand

Next row (RS): K1, k2tog, k4, k2tog, k1. (8 stitches)

Next row (WS): Purl all stitches.

Bind off: Bind off all stitches. Leave a long tail (about 8 inches) for seaming. Repeat to make the second arm.

Finishing

Now it's time to bring your Spectral Snuggle Wraith to life!

1. Seam the body: Place the front and back body pieces together with right sides facing. Using the long tail from the bind-off, sew along the sides and bottom, leaving the top (neck edge) open. Turn the body right side out.

2. Attach the arms: Position the arms on the sides of the body, about 1 inch below the shoulder seam. Using the long tails, sew each arm securely in place. The arms should hang loosely at the sides.

3. Embroider the face: Using black yarn and a tapestry needle, embroider two small oval eyes on the front of the hood, about 1 inch apart. Use a satin stitch—working closely spaced parallel stitches to fill in the shape—for a smooth, solid appearance. Keep the eyes gentle and rounded for a friendly expression.

4. Add the cheeks: Using pink yarn, embroider two small circles for cheeks, positioned just below and slightly outside the eyes. Again, use satin stitch for a neat finish.

5. Weave in all ends: Use your tapestry needle to weave any remaining yarn tails into the inside of the ghost, trimming any excess.

6. Optional hanging loop: For a decorative touch, create a small loop of yarn at the top of the hood. Cut a 6-inch piece of white yarn, fold it in half, and use a tapestry needle to pull the folded end through the top of the hood. Thread the loose ends through the loop and pull tight to secure. This makes it easy to hang your ghost as a decoration.

Your Spectral Snuggle Wraith Is Complete!

Congratulations! You've just created your very own Spectral Snuggle Wraith—a soft, squishy, and utterly adorable knitted ghost. Whether it's perched on a shelf for Halloween, nestled in a cozy corner year-round, or gifted to a fellow spooky-craft lover, this little wraith is sure to bring smiles and warmth wherever it goes.

The beauty of this pattern is its versatility—experiment with different yarn colors for a pastel ghost, add a tiny embroidered mouth, or even attach a small bell to the hood for a whimsical touch. Each Wraith you make will have its own unique personality.

We'd love to see your creations! Share your Spectral Snuggle Wraith on social media with the hashtag #SpectralSnuggleWraith and tag us so we can admire your handiwork. Happy knitting, and may your haunts be ever gentle and cozy!